TapAFix

7 Quick Steps to Prevent Water Damage and Reduce Water Waste From Leaks

The issues with leaky water lines and basement flooding are serious, costly and cumbersome. Homeowners are responsible for determining where the leaks are and getting rid of any standing water, to reduce the overall risk of damage from the water.

Here are some quick tips to prevent water damage losses to a minimum and to keep water use within the household to a minimum. 

1. What to Do When a Leak Starts

If there is water leaking now, perform the actions below:

  • Turn off the water. In case of doubt as to the position of the main shut off seek the advice of the building manager or landlord.
  • Be careful not to be in contact with any power. If the leak is near the appliance or an outlet, never come in contact with it or walk in the water. The room is safe to turn off its power to off at the circuit breaker from a dry area. 
  • Contain the water. Put towels down – or a bucket, if space permits.
  • Dry the area as much as you can. Mops will be available and if it is safe, a fan can be turned on. 
  • If you have hidden leaks or water is going into the wall or your pipe breaks, it may be time to call in professional water leak or plumbing help. 

Small pipe leaks may be helped by putting on a pipe clamp or by using some plumbing tape. However, neither is a final repair. 

2. Check for Hidden Leaks

Not all leaks leave a puddle. Look for these warning signs:

  • Damp patches on walls or ceilings
  • Peeling paint or swollen cabinets
  • Musty smells
  • Water around the toilet base
  • A toilet that keeps refilling

Check the meter by either turning off everything using water and waiting a few minutes and rechecking, or checking the meter and waiting a few minutes to check it again. There could be a leak if the meter has moved. Don’t forget automatic water using devices.

Test toilet: Put some coloured stuff into toilet tank. Wait 10 – 15 minutes, do not flush. Look at the toilet for colour in the bowl – this could be a sign of a toilet leak. 

3. Make Home Leak Prevention Easy

Some simple inspection should be carried out to ensure problems aren’t meting extensive harm.

Inspect appliance hoses

Inspect washing machine, dishwasher, refrigerator and water heater hoses for cracks, bulges, rust, and dampness. Replace damaged or worn hoses immediately. 

Place leak alarms in risky spots

Place water sensors under sinks, next to washing machine and next to water heater. Some intelligent systems can notify you in your cell phone or automated turn off the water.

Test alarms regularly. They’re an early warning—not a substitute for checking your plumbing.

Keep an eye on older fixtures

Inspect old-aged pipes, water heaters for corrosion or signs of leaks and listen for unusual noises. Have a professional inspect for wear and tear or if there are recurring leaks.

4. Keep Rain and Snowmelt Away From Your Home

Basement flooding, heavy rain and melting snow can cause prevent water damage to Canadian homes as well.

  • Once a year, clean gutters twice a year. Clear off leaves and litter to allow water to flow.
  • Extend downspouts. Drain away from foundation (consult local rules). The Government of Canada suggests a minimum 2 metre distance for downspouts to be placed at wherever possible.
  • Look around yard of home. This should slope away from the base. Check for water around window and wall areas in the basement.
  • Test your sump pump to make sure it is working. Ensure that it’s running and the discharge pipe is not blocked. If the pump or its power source goes out, a back up pump or power source can fill the tank and preserve water for when it’s needed again.
  • Discuss the need for a backwater valve. Plumbers will know the pros and cons of using a particular home drain cleaning system for any house with a sewer backup. 

Don’t put yourself in danger by climbing a roof or ladder to clean gutters. When not able to reach the gutters, hire someone to do it for correct prevent water damage prevention.

5. Save Water With Small Daily Habits

The following are a few tips to help conserve water while making moderate adjustments.

  • Take shorter showers. Make an effort to make them about five minutes long.
  • Avoid leaving the tap open when you aren’t using the water, such as while you are brushing.
  • Do as much as possible of the laundry and dishes in batch loads, and do not in half loads with minimal clothes or dishes.
  • Be sure no toilet is running and any dripping faucets are turned off. Even the smallest leaks will eventually empty out the sink.
  • Use water that isn’t dirty to water your plants. Save water as it heats up in the tap to do so.
  • Clean outside, preferably using a broom and not a running hose, to tidy up your walkway. 

There are other water saving techniques in Toronto, for example: regularly check toilets to ensure there are no leaks. There is also the option to do a full load of dishes in the dishwasher, or simply turn the water off while you’re brushing your teeth.

6. When to Call a Professional

Get professional help if:

  • You can’t find or stop the leak.
  • A pipe near your house has ruptured or continues to leak.
  • Water is seeping into a wall, ceiling or basement floor.
  • Your sump pump or water heater isn’t working properly.
  • Frequent moisture or mold problems are observed. 

If you need to have some sort of plumbing or other type of repair done in your house, you can order a qualified person to do it for you by using TapAFix. Choose the service, arrange a date and have the support arranged via the application.

Your Quick Monthly Check

Set a reminder to spend a few minutes checking:

  • Under sinks and around toilets
  • Appliance hoses and water connections
  • The water meter when no water is running
  • Drip, downspout and basement drainage systems.
  • Wet patches, spots and odors of “musty” or “moldy” smell 

The main thing: Don’t put off repair of small leaks. Close off the water if necessary, thoroughly dry wet surfaces and stop the water. Some easy tests will save your house and save water!

Frequently Asked Questions (FAQs)

What are 7 ways to save water?

  1. Be quick in the shower.
  2. Don’t let the water run while you are brushing your teeth.
  3. Fix all the leaks, including those in the plumbing that cause your sink faucet to drip, or in your toilet tank.
  4. Run your dishwasher and clothes washing machine only when they are full.
  5. Use a bucket of water instead of a hose to wash your car.
  6. Water the plants at times of day when the temperature is cool. 
  7. Clean water is reused for tasks, including water used to warm up the water heater while waiting for hot water to come through on the shower. 

What are 10 ways to keep water clean?

  1. Do not pour any oil, paint or chemicals down a drain.
  2. Throw out medication correctly – DO NOT FLUSH INTO THE TOILET!
  3. Only use household cleaning and fertilizing goods sparingly.
  4. Pick up pet waste.
  5. Don’t litter near rivers, lakes, or storm drains.
  6. Decrease the amount of chemicals used in gardens.
  7. Don’t use car wash soap or runoff that goes into storm drains.
  8. Dispose of batteries (recycle) and hazardous waste at designated sites.
  9. Keep septic systems in good working order to avoid septic leaks.
  10. Assist in local waterway cleanup efforts, and report pollution. 

What are 10 ways to save water?

  1. Solve any leaks when you find them.
  2. Take less long in the shower.
  3. Close off water flow if you aren’t currently using it.
  4. Install aerated faucets and showerheads that are more water-saving.
  5. Run your washing machines and dishwashers with the largest capacity they have for laundry or cleaning the dishes.
  6. Put in a toilet that is water-saving or has dual flushing.
  7. Limit grass watering unless absolutely required.
  8. Collect rain in an exterior rain container (filter it first) if you need to irrigate plants (if permitted).
  9. For sweeping, don’t hose your patio or your driveway, just use your broom.
  10. Using less water for your plants and when cleaning. 

How to quickly fix prevent water damage?

  1. Turn off the appliance or source of water.
  2. Keep liquids away from electric outlets and appliances and turn off the power at the circuit breaker box or fuse box.
  3. Clear standing water from the area with a mop, a wet-dry vacuum or towels if there are no hazards.
  4. There are hazards in the damp areas. 
  5. Drying the area with the exhaust system, fan or dehumidifier in quick hours works effective.
  6. If there are any leaks in the sewage, under the insulation, in the floors or behind the walls, it is best to hire an expert to assist you.
  7. Avoid patching or covering over areas where you believe there are indications of mould or dampness.